Sheer CFX Satin Steel Push LED Dimmer 1 Gang 2 Way 100W

Hamilton-Litestat
84C1X100LED
£55.03 £45.86
Lead time
Order by 4pm for Next Day Delivery
Sheer Screwless Satin Steel Push Dimmer 1 Gang 2 Way 100W

HAM 84C1X100LED
Sheer Screwless Satin Steel 1 Gang 2 Way 100W Intelligent LED Dimmer 

There is no other way to say it, dimming LED is a minefield. Due to the way the circuitry works, there is no direct correlation between brightness and energy drawn, which makes finding the right LED bulb to work with a dimmer quite a task. Incorporating Hamilton's new LEDstat technology, the Sheer CFX 1 gang 2 way dimmer is set to revolutionise the lighting world and how we dim LEDs forever. With concealed fixings and satin steel face plate, the 84C1X100LED is the ultimate in contemporary looks and functionality. 

Designed to operate in 'Trailing Edge' mode by default, it creates the dimming effect by fading the voltage on the trailing edge of the waveform rather than abruptly shutting it off as in leading edge format, therefore eliminating the 'buzzing' noise that can happen with normal leading edge dimmers. Also incorporating features such as soft start and smooth control there is a great increase in lamp life. The huge advance however is that the 84C1X100LED monitors and programmes itself for best performance according to the lamp used. It also sets itself up on install making initial fitting very simple. This means that it is compatible with a wide selection of lamps including Incandescent lamps, Mains halogen, Mains dimmable LED lamps and Dimmable LV electronic transformers. Leading edge format can also be selected manually for best operation should it be required. Minimum light level can also be adjusted by the control potentiometer on the front rather than having to remove the unit from the wall to find a control on the back.

2 way operation means the 84C1X100LED can be used in 2 way circuits allowing you to switch/ dim lights from 2 locations although it must be noted that there must be a two way switch present in that circuit. This 2 way switch must also be a retractive/ push to make switch, available in the Grid-It range. A normal rocker switch will not activate the dimmer module in the correct way. It is not possible to have more than one dimmer in a 2 way circuit. Its slim front plate does meant a 35mm BS 4662 compliant back box is required to fit. These are readily available, take a look in the 'Related Products' section.

As with all Hamilton ranges, the Sheer CFX Satin Steel is an extensive family, incorporating everything from switches and shaver sockets to TV, phone and data. If there is something out of the ordinary you require, it's bound to be available in the modular ranges so with the matching Euro and Grid plates you can be sure that all your satin steel switchgear is coordinated and complimenting your home.

Technical Specification
- Plate Size: 88 x 88mm
- Plate Depth: 1.5mm
- Min Wall Box Depth: 35mm
- Minimum load: 5 watts mains LED
- Maximum load: 100watts in trailing edge mode, 75watts in leading edge
- Description: Hamilton Hartland Satin Steel 1 Gang 2 Way 100W Intelligent LED Dimmer 
Compatible Lamp Types
- Incandescent lamps
- Mains halogen
- Mains dimmable LED lamps*
- Dimmable LV electronic transformers

LEDSTAT FEATURES:

- Designed to control mains dimmable LED lamps or luminaires.
- Built in thermal overload protection.
- Soft start feature helps extend lamp life.
- Can be used as part of a multi-way dimming operation allowing you
to switch and dim the lights from multiple points.
- Manually select a dimmer mode (leading or trailing edge).
- Set minimum light level via the potentiometer which negates the
need to remove dimmer from the wall to adjust this setting.
- Designed to fit in a 35mm BS4662 flush wall box.

* Please note the Hamilton LEDstat is not compatible with mains voltage integrated LED fittings 

Product Data
Brand Hamilton-Litestat
Manufacturer's Part Number 84C1X100LED
Lead time Order by 4pm for Next Day Delivery
Type Dimmer
Style Screwless
Range Sheer CFX
Plate Size Single
Gang 1
Screwless? Yes
Finish Satin Stainless
Current Rating (A) 0.4
Mounting Depth (mm) 35
Width (mm) 86
Height (mm) 86
Projection (mm) 4.5
IP Rating IP2X
Material Metal
EAN 501750400145
Guarantee 1 year
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© 1985 – 2021 Gil-Lec Limited. All rights reserved.