Cbus 12 Channel Relay Powered

Cbus L5512RVF 12 Channel Relay Powered

CB L5512RVF

£585.90 ex. vat £703.08 inc. vat

Usually ships in 5 working days

Cbus L5512RVF 12 Channel Relay Powered CB L5512RVF

Details

Clipsal C-Bus L5512RVF
CBus 12 Channel Relay 10A Powered


C-Bus L5512RVF Overview
The C-Bus 12 channel relay units are DIN rail mounted units suitable for switching resistive, inductive and fl uorescent loads. These relay units feature learn mode, local and remote overrides for on/off control, Channel, C-Bus and unit status indicators.

Load control is provided by a special dual contact relay designed for extreme long life with lighting loads, even with power factor corrected fluorescent lamps. One contact is tungsten designed to withstand high in rush currents and arcing when opening and the other contact is silver alloy for steady state current operation. The relay units are available as passive and current sourcing models that source up to 200mA to the C-Bus network.

C-Bus L5512RVF Technical Information
Code L5512RVF
Line Supply Voltage 220-240VA
Supply Frequency 47-53Hz and 57-63Hz
C-Bus Supply Voltage 15-36VDC @ 0mA
Load Rating per Channel 10A
Contact Type Voltage free, normally open, magnetically latched
Switch Operations Greater than 60,000 operations
In-Rush Current 120A (20msec)
Compatible Loads Resistive, inductive, incandescent and fl uorescent
C-Bus Source Current 200mA
Maximum Number of Units on a Single C-Bus Network 10
Status Indicators Channel Status (12), Unit and C-Bus
Warm Up Time 5 seconds
Network Clock Software selectable
Network Burden Software selectable
C-Bus Termination 2 x RJ45 Socket
Load Termination 2 x 1.5mm2 or 1 x 2.5mm2
Operating Temperature Range 0?C to 45?C
Operating Humidity Range 0 - 95% RH, non-condensing

Product Features of theCBus 12 Channel Relay Powered
- Provides 12 x 10A channels of switching output
- Programmable via the learn mode feature or using the C-Bus Toolkit Software
- Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power
- Local and remote on/off control independent of C-Bus communications
- Programmable power up state following power cycling
- Logic states (and/or) programmable using the C-Bus Toolkit Software
- Features magnetically latched relays that hold state in case of loss of C-Bus communications
- Designed to fi t standard 35mm top hat DIN rail, measures just 8M in size
- Designed to fi t into standard electrical switchboards
- RCM (Australia / New Zealand), CE (European Community) compliant

Group : Clipsal Cbus Home Automation / Building Management Systems
Range : Clipsal Cbus Output Units
Sub Cat: Clipsal CBus Relays
Code : Cbus L5512RVF
Description : Cbus 12 Channel Relay Powered / Clipsal Cbus 12 Channel Relay Powered