Cbus 8 Channel Dimmer Powered

Cbus L5508D1A 8 Channel Dimmer Powered

CB L5508D1A

£493.42 ex. vat £592.10 inc. vat

Usually ships in 5 working days

Cbus L5508D1A 8 Channel Dimmer Powered CB L5508D1A

Details

REGISTERED C-BUS SYSTEMS INSTALLERS RECEIVE PREFERENTIAL DISCOUNTED PRICE. PLEASE ENTER YOUR DETAILS ABOVE IN ORDER TO SEE DISCOUNTED PRICE.

Clipsal C-Bus L5508D1A
CBus 8 Channel Dimmer Powered


The C-Bus 8 channel dimmer units are DIN rail mount units employing leading edge phase control circuitry for dimming control. These dimmer units feature learn mode, local and remote overrides for on/off control, channel, C-Bus and unit status indicators. Each dimmer channel is rated at 1 Amp and is suitable for incandescent and low voltage lighting using magnetic and leading edge compatible transformers. The dimmer output is controllable over the range of 2-98%, while frequency tracking algorithms ensure fl icker-free operation and smooth dimming control. The dimmer units are available as passive and current sourcing models that source up to 200mA to the C-Bus network.

C-Bus L5508D1A Technical Information
Catalogue Number : L5508D1A
Line Supply Voltage : 220-240VAC
Supply Frequency : 47-53Hz and 57-63Hz
Frequency Drift : 3Hz/minute (maximum)
Frequency Step Change : 0.1Hz (maximum)
C-Bus Supply Voltage : 15-36VDC @ 0mA
Load Rating per Channel : 1A
Minimum Load : 15W per channel
Control Range : 2 - 98%
Compatible Loads : Incandescent and low voltage lighting.
Suitable for use with leading edge compatible electronic transformers.
C-Bus Source Current : 200mA
Maximum Number of Units on a Single C-Bus Network : 10
Status Indicators : Channel Status (8), Unit and C-Bus
Warm Up Time : 5 seconds
Network Clock : Software selectable
Network Burden : Software selectable
C-Bus Termination : 2 x RJ45 Socket
Load Termination : 2 x 1.5mm2 or 1 x 2.5mm2
Operating Temperature Range : 0?C to 45?C
Operating Humidity Range : 0 - 95% RH, non-condensing

C-Bus 8 Channel Dimmer Product Features
- Provides 8 x 1A channels of dimming control
- Programmable via the learn mode feature or using the C-Bus Toolkit Software
- Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power
- Local and remote on/off control independent of C-Bus communications
- Programmable power up state following power cycling.
- Logic states (max/min) programmable using the C-Bus Toolkit Software
- Employs frequency-tracking algorithms for smooth fl icker free operation
- Designed to fi t standard 35mm top hat DIN rail, measures just 12M in size
- Designed to fi t into standard electrical switchboards
- RCM (Australia/New Zealand), CE (European Community) compliant

Group : Clipsal Cbus Home Automation / Building Management Systems
Range : Clipsal Cbus Output Units
Sub Cat: Clipsal CBus Dimmers
Code : Cbus L5508D1A
Description : Cbus 8 Channel Dimmer Powered / Clipsal Cbus 8 Channel Dimmer Powered

REGISTERED C-BUS SYSTEMS INSTALLERS RECEIVE PREFERENTIAL DISCOUNTED PRICE. PLEASE ENTER YOUR DETAILS ABOVE IN ORDER TO SEE DISCOUNTED PRICE.