Hager VSR118SPD 18 Way 100A Switch SPD Flush
The VSR118SPD is part of Hager's Design 50 range. It has be tailored to be be aesthetically pleasing while satisfying all aspects of the amendment 3 wiring regulations. This stylish fuse board can be painted to suit any interior. This particular model is designed to house up to 18 RCBO's and comes with a 100a mains switch dis-connector.
The VSR range is designed to be recessed into walls making ideal for sleek modern interiors and places where space is at a premium.
Metal switch disconnector incomer enclosures, single row from 10 to 20 outgoing ways.
Enclosures come supplied with a full metal DIN rail, 100A switch disconnector incomer and full complement of earth and neutral terminals along with marking labels, busbar, instructions, rear cable protector plate and meter tail clamp. Conforms to BS EN 61439-3 including Annex ZB (16kA rating).
Recommended for use with TT systems when utilising RCBO on outgoing circuits.
Adjustable depth in wall 72mm-92mm.
Maximum cable space above and below the din rail even with RCBO's
No restrictions under the DIN rail
Cable entries positioned at the top, bottom and reat easy access to devices
Cable entry protectors available to prevent damage to cable caused by sharp edges
Top Mounted terminal bars allowing for easy and tidy connections - fully rated to 100A
'Snap-able' bus bar means one less tool and speeds up install
Cable clamp - secures mains cable to prevent movement be passed on to the terminals
|Manufacturer's Part Number||VSR118SPD|
|Lead time||Made to order - Delivery times vary|
|Incoming Devices||100A Main Switch + SPD|
|No. of Rows||1|
TERM CTI1.5-6KIT Insulated Terminal Kit with Crimper£26.96 £22.47