C-Bus Light Level Sensor

Clipsal C-Bus 5031PEWPGY
CBus Light Level Sensor

C-Bus 5031PEWPGY Overview
The C-Bus light level sensors are surface mounted input units used to measure ambient light levels and regulate lighting loads. The sensor has a field of view of 180 degrees and is capable of measuring lighting levels in the range of 20 to 3000 lux and regulating lighting in the range of 40 to 1600 lux, which is suitable for most commercial applications.

The light level sensor may be used in conjunction with non-dimmable ballasts to bank switch luminairies or with dimmable electronic ballasts to regulate lighting levels continuously, within a programmed target range. The unit features built in lag, to prevent rapid changes in output, due to changes in environmental conditions, such as cloud cover or rapid movement through the detection area.

C-Bus 5031PEWPGY Technical Information
C-Bus Supply Voltage 15-36VDC @ 18mA
Light Level (measure) 20 - 3000 lux
Light Level (regulate) 40 - 1600 lux
Field of View 180 degrees
Time Constant Approx. 90 seconds
Mounting Height 2.4m nominal, (2.0 to 3.2m)
Field of View 180 degrees
Maximum Number of Units on a Single C-Bus Network 100
Status Indicator Programmable
Warm Up Time 5 seconds
C-Bus Termination Screw terminals
Standard Colours White
Operating Temperature 0?C to 45?C
Operating Humidity 0 - 95% RH, non condensing

Features of the CBus Light Level Sensor
- Programmable using the C-Bus confi guration software
- Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power
- Programmable target light level and margin
- Bank switching or light level regulation
- C-Tick (Australia/New Zealand), CE (European Community) compliant

Group : Clipsal Cbus Home Automation / Building Management Systems
Range : Clipsal Cbus System Units
Sub Cat : Clipsal Cbus Sensors
Code : Cbus 5031PEWPGY
Description : Cbus Light Level Sensor / Clipsal Cbus Light Level Sensor