MK K5686S MAG

MK 12 Way Split Load Insulated Consumer Unit 100A 80A 30mA

MK K5686S Dimensions
Width: 378mm x Height: 230mm x Depth: 110mm

MK K5686S Details
100A switch disconnector and 80A / 30mA RCD. Accepts a further 8 one module products in any configuration of RCD protected circuits between 1/8 and 8/1. Precautions must be taken to maintain IP rating, i.e correct use of cable glands and knockouts.

All MK Sentry Split Load Boards are fitted with a switch disconnector and RCD together with all necessary split load cabling. The flexibilty of design allows the RCD to be positioned to suit the required configuration of RCD protected and non-protected circuits, subject to the rating of either the switch or RCD not being exceeded.

All MK Sentry Insulated (Plastic) Consumer Units feature a robust base together with an all over front cover moulded in an impact resistant, flame retardant thermoplastic and a polycarbonate lid. Cable entry points are located on top, bottom, side and rear surfaces.

General Information About MK Sentry Fuseboards
1. Units can be stacked for larger installations.
2. Compact size, but wiring space increased where most required.
3. Low profile and curved design, blends unobtrusively with the environment
4. Colour coded earth and neutral terminal located at top of unit for ease of wiring
5. Downward opening lid hides labels and devices
6. Backed out and captive combi-head screws allows speedy installation
7. Colour coded earth and neutral terminal located at top of unit for ease of wiring
8. Ample 360 degree knock outs for cable routing - Open cable entry at rear plus optional rear knock outs.
9. Easily removable din rail improves first fix
10. Raised din rail for improved cable routing
11. Floating busbar system for maximum installation flexibilty including acceptance of control modules.
12. Offset incomer provides additional wiring space making mains input connections easier.
13. Tripod fixing holes to cope with un-even mounting surfaces. Hole locations allow access for cordless drills and power drivers.

Consumer Unit Selection Guide
Step 1. Determine the type of consumer unit configuration required: i.e: split load, dual tariff, standard or combination of split load / dual tariff. For each switch disconnector or RCD to be used allow 2 modular.
Step 2. Determine the number of outgoing circuits required. i.e: Cooker, Lighting, Ring Main, etc For each circuit to be protected by an MCB or RCBO allow 1 modular way.
Step 3. Determine what control products are required. i.e: Bell Transformer, Time Delay Switch, Contactors etc
Step 4: Determine the number of 'spare' modular ways required for future upgrades. For each 'spare' modular way select 1 sentry blank module (5544s - available on this website)
Step 5: Now add together the total number of modular ways required.
Step 6: Select from the MK Sentry range of Insulated (plastic), metal, flush or stacked consumer units.

MK Code: MK K5686S MAG
Order Code: MK K5686S MAG
Range: Mk Sentry

Alternate Descriptions: MK 12 way split Load fuseboard / MK 12 way split load board / MK Sentry split load consumer unit 12 way insulated