Martindale PAT Tester Pro

Martindale HPAT600 PAT Tester Pro

MARTINDALE HPAT600

£386.25 ex. vat £463.50 inc. vat

Usually ships in 5 working days

Martindale HPAT600 PAT Tester Pro MARTINDALE HPAT600

Details

MARTINDALE HPAT600
Martindale 'HandyPAT' PAT Tester


The HPAT600 is a battery powered portable Appliance Tester with the following features:-
- Dual Insulation Test Voltage - The insulation measurement test voltage can be set to either 500V or 250V.
- User Selectable Pass Levels - Appliance test pass levels may be user defined.
- Easy or Fast Operating Modes - The HPAT600 can be operated in either of two modes. In manual mode, aimed at the newcomer to PAT testing, a connection diagram for the selected test type is shown on the display. Each step of a test requires user confirmation by a press of the OK button. In the Auto mode, for the experienced operator, the HPAT600 will automatically run through a selected test sequence without any further user interaction unless a failure is encountered.
- IEC Lead Test - The HPAT600 can also be used to check IEC leads for earth continuity, insulation, and polarity.
- Test Data Memory Storage - The HPAT600 is able to store test data for up to 200 appliances into memory.

Technical Specification

Earth Continuity
Test voltage: 4V DC (into open circuit)
Test current: 200mA DC (into short circuit)
Range: 0 - 19.99O Resolution: 0.01O
Accuracy: ? (5% reading + 2 digits)
Default pass levels: Class I: 0.1 O. Lead: 0.1 O
User selectable pass levels: 0.1O to 0.9O in 0.1O steps

Insulation
Test voltage:
500V range: >500V DC at 1mA ( < 600V DC into open circuit)
250V range: >250V DC at 1mA ( < 300V DC into open circuit)
Test current: 1.5mA (into short circuit)
Ranges: 2.00MO, 20.0MO, 200MO Resolution: 0.01MO
Accuracy: ? (5% reading + 2 digits)
Default pass level:
Lead: 1 MO
Class I: 1 MO
Class II: 2 MO
User selectable pass levels: 0.3 MO to 1MO in 0.1MO steps
1MO to 10MO in 1MO steps

Fuse Test
Test voltage: 4V DC (into open circuit)
Test current: 200mA DC (into short circuit)
Pass level: >2mA
Simulated Load Test
Test voltage: 4V DC (into open circuit)
Test current: 200mA DC (into short circuit)
Accuracy: ? (5% reading + 2 digits) (referenced to 230V)

General
Overload protection: 300V AC/DC
Protection class: IP20
Safety: Complies to BS EN 61010-1:2001
Temperature Range: -10 to 40?C, non-condensing
Power supply: 6 x 1.2V AA NiMH rechargeable batteries
1800mAh, or greater
Dimensions: 90 x 210 x 54mm
Weight: Approx 700g (including batteries and leads)

Overview

The HPAT600 offers profitability gains for service companies and productivity gains for health & safety officers, premises & facilities managers and other users, for example school caretakers.

Battery powered for lightweight and easy use, its supplied with mains leads and a car charger, crammed with features such as dual insulation test voltage, user selectable pass levels, easy (manual) or fast (automatic) operating mode, IEC lead test insulation, polarity, backlight, test lead null out feature, simulated load test and test data storage for up to 200 appliances - equivalent to a whole days testing.

It tests class I, class II appliances and power cords. It incorporates a 250V insulation test for sensitive IT equipment and appliances with mains filters. A 200mA DC earth continuity test is safe for all appliances and complies with the new code of practice for PAT testing. Limits can be set by managers to suit their own requirements eg. to identify appliances without borderline passes.

In manual mode, a connection diagram for the selected test type is shown on the display. Each step of a test requires user confirmation by a press of the OK button. In the automatic mode, it will quickly run through a selected test sequence without any further user interaction unless a failure is encountered.

All these features make it the PAT of choice for implementing an efficient and cost effective portable appliance testing solution.