Martindale PAT Tester Battery Only

Martindale HPAT500 PAT Tester Battery Only

MARTINDALE HPAT500

£318.75 ex. vat £382.50 inc. vat

Usually ships in 5 working days

Martindale HPAT500 PAT Tester Battery Only MARTINDALE HPAT500

Details

MARTINDALE HPAT500
Martindale 'Handy Pat' PAT Tester


A new addition to the hand-held PAT range which is ideal for use where there is no convenient power socket. It's easy to use and reliable, with a simple one button, one test sequence selection, displays measured values as well as a "pass" or "fail" decision and comes complete with a mains charger.

User functions include:
Class I, Class II and power lead tests
Insulation Test at 500V
200mA DC continuity test, with two pass levels
Fixed pass levels
Displays measured values and PASS or FAIL result

Technical Specification

EARTH CONTINUITY
Test voltage: 4V DC (into open circuit)
Test current: 200mA DC (into short
circuit)
Range: 0 - 19.99O
Resolution: 0.01O
Accuracy: ? (5% of reading + 2 digits)
Fixed pass limits:
Lead = 0.10 O = PASS
= 0.20 O = NOTE x.xx PASS
Class I = 0.10 O = PASS
= 0.20 O = NOTE x.xx PASS
If NOTE x.xx O PASS is displayed, end user of HPAT should take note of the Earth Continuity resistance value and reach a pass/fail decision for the appliance.

INSULATION
Fixed voltage:
>500V DC at 1mA (< 600V DC into open circuit)
Test current: 1.5mA (into short circuit)
Ranges: 2.00MO, 20.0MO, 200MO
Resolution: 0.01MO
Accuracy: <100MO ? (5% reading + 2 digits) >100MO ? (10% reading + 2 digits)
Fixed pass level:
Lead: = 1.0 MO
Class I: = 1.0 MO
Class II: = 2.0 MO

FUSE CHECK
Test voltage: 4V DC (into open circuit)
Test current: 200mA DC (into short circuit)
Pass level: >2mA

GENERAL
Overload protection: 300V AC/DC
Protection class: IP20
Safety: Complies to BS EN 61010-1: 2001
Temperature Range: -10 to 40?C, non-condensing
Batteries: 6 x 1.2V AA NiMH rechargeable batteries 1800mAh, or greater
Caution - use only the battery type specified
Battery Life: Fully charged, minimum 600 complete tests. The HPAT500 will operate fully from the battery charger in the event of discharged batteries. Do not remove batteries.
Auto Power Down: After 10 minutes of inactivity, or when battery low
Battery Charger: Input: 230V 50Hz
Output: 12VDC at 300mA, 5.5 jack x 2.5 bore centre positive
Dimensions: 90 x 210 x 54mm
Weight: Approx 700g (including batteries & leads)