Sheer Stainless Steel LED Dimmer 1G 2W 100w

Sheer Stainless Steel LED Multi-Way Dimmer 1 Gang

HAM 841X100LED

£28.30 ex. vat £33.96 inc. vat

In Stock

Order by 4pm for Next Day Delivery

Hamilton 741X100LED Sheer Stainless Steel 1 Gang Intelligent Led Dimmer 100w 841X100LED

Details

HAM 841X100LED
Hamilton Sheer Satin Steel 1 Gang 2 Way 100W Intelligent LED Dimmer

The future of dimming LED is here.

LED lighting is taking the world by storm, and for good reason. It is longer lasting, cheaper to run and highly reliable. Dimming LED however, has proven to be a less easy task, until now. The Hamilton Sheer 1 gang 2 way LED dimmer has revolutionised the lighting world with its LEDstat dimming module. At face value, it looks like a standard dimmer switch, but what goes on behind the super slim stainless steel front plate is much more than standard.

Designed by default to operate in 'Trailing Edge' mode, it creates the dimming effect by fading the voltage on the trailing edge of the waveform rather than abruptly shutting it off as in leading edge format. Also incorporating features such as soft start, silent running and smooth control there is a great increase in lamp life. The huge advance however is that the 841x100LED monitors and programmes itself for best performance according to the lamp used. It also sets itself up on install making initial fitting very simple. This means that it is compatible with a wide selection of lamps including Incandescent lamps, Mains halogen, Mains dimmable LED lamps and Dimmable LV electronic transformers. Leading edge format can also be selected manually for best operation should it be required. Minimum light level can also be adjusted by the control potentiometer on the front rather than having to remove the unit from the wall to find a control on the back.

2 way operation means the 841X100LED can be used in multi-way circuits allowing you to switch/ dim lights from multiple points although it must be noted that there must be a two way switch present in that circuit. This 2 way switch must also be a retractive/ push to make switch, available in the Grid-It range. A normal rocker switch will not activate the dimmer module in the correct way. Its slim front plate does meant a 35mm BS 4662 compliant back box is required to fit. These are readily available, take a look in the 'Related Products' section.

As with all Hamilton ranges, the Sheer Satin Steel is an extensive family, incorporating everything from switches and shaver sockets to TV, phone and data. If there is something out of the ordinary you require, it's bound to be available in the modular ranges so with the matching Euro and Grid plates you can be sure that all your satin steel switchgear is coordinated and complimenting your home.

Technical Specification
- Plate Size: 88 x 88mm
- Plate Depth: 1.5mm
- Min Wall Box Depth: 35mm
- Minimum load: 5 watts mains LED
- Maximum load: 100watts in trailing edge mode, 75watts in leading edge
- Description: Hamilton Hartland Satin Steel 1 Gang 2 Way 100W Intelligent LED Dimmer 
Compatible Lamp Types
- Incandescent lamps
- Mains halogen
- Mains dimmable LED lamps
- Dimmable LV electronic transformers

LEDSTAT FEATURES:

- Designed to control mains dimmable LED lamps or luminaires.
- Built in thermal overload protection.
- Soft start feature helps extend lamp life.
- Can be used as part of a multi-way dimming operation allowing you
to switch and dim the lights from multiple points.
- Manually select a dimmer mode (leading or trailing edge).
- Set minimum light level via the potentiometer which negates the
need to remove dimmer from the wall to adjust this setting.
- Designed to fit in a 35mm BS4662 flush wall box.

AU-FRLD811/40

Aurora AU-FRLD811B M10 8.5w IP65 Dimmable LED Downlight Cool White

£18.50 ex. vat £22.20 inc. vat

AU-DLM981W

Aurora Fixed Fire Rated Downlight White

£6.55 ex. vat £7.86 inc. vat