Cbus 1 Channel Relay

Cbus 5101R 1 Channel Relay

CB 5101R

£177.16 ex. vat £212.59 inc. vat

Usually ships in 5 working days

Cbus 5101R 1 Channel Relay CB 5101R

Details

Clipsal C-Bus 5101R
CBus 1 Channel Relay


C-Bus 5101R Overview
The C-Bus 1 and 2 channel relay units are panel mounted units suitable for switching resistive, inductive and fl uorescent loads. The units are ideally suited for mounting inside fluorescent lighting products, street lighting columns and adjacent HID luminaires due to their small size and volume.

These relay units feature a remote override for on/off control and a C-Bus status indicator. Load control is provided by a special dual contact relay designed for extreme long life with lighting loads, even with power factor corrected fl uorescent lamps. One contact is tungsten designed to withstand high in-rush currents and arcing when opening and the other contact is silver alloy for steady state current operation.

The single channel relay also features a 0-10V output, and is compatible with dimmable electronic ballasts, hence the relay may be used to switch line voltage to the ballast as well as dim the output using the 0-10V output. The relay units are available as passive models only, hence do not source current to the C-Bus network.

C-Bus 5101R Technical Information
Catalogue Number 5101R
Line Supply Voltage 220-240VAC
Supply Frequency 47-53Hz and 57-63Hz
C-Bus Supply Voltage 15-36VDC @ 0mA
Load Rating per Channel 10A AC3
Contact Type Switched active
Switch Operations Greater than 60,000 operations
In-Rush Current 120A (20msec)
Compatible Loads Resistive, inductive, incandescent and fl uorescent
Analog Output 0 - 10VDC, compatible with up to 2 x 36W immable electronic ballasts
C-Bus Source Current 0mA
Maximum Number of Units on a Single C-Bus Network 100
Status Indicators C-Bus power available
Warm Up Time 5 seconds
C-Bus Termination Screw terminals
Load Termination Push connectors, 1 x 2.5mm2
Operating Temperature Range 0?C to 45?C
Operating Humidity Range 0 - 95% RH, non-condensing

Product Features of the CBus 1 Channel Relay
- Programmable via the C-Bus Toolkit Software
- Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power
- Remote on/off control independent of C-Bus communications
- Programmable power up state following power cycling
- Logic states (and/or) programmable using the C-Bus Toolkit Software
- Panel mounted, small size and volume
- RCM (Australia/New Zealand), CE (European Community) compliant

Group : Clipsal Cbus Home Automation / Building Management Systems
Range : Clipsal Cbus Output Units
Sub Cat: Clipsal CBus Relays
Code : Cbus 5101R
Description : Cbus 1 Channel Relay / Clipsal Cbus 1 Channel Relay