20-60VA Electronic Plug-In Transformer

Aurora 20-60VA Electronic Plug-In Transformer

AU-PD60

£7.93 ex. vat £9.52 inc. vat

Usually ships in 3 working days

AU-PD60 Aurora 20-60VA Electronic Plug-In Transformer AU-PD60

Details

AURORA AU-PD60

AURORA 20-60W/VA Premium Electronic Plug In Transformer

Length: 156mm
Width: 36mm
Height: 20mm
Nominal Power: 20-60W/VA
Min Load for dimming: 35W
Max load on one output: 60VA

Aurora's transfomers are designed to suit a huge variety of installations. The transformers are tested to the highest levels, complying with all of the latest European safety and EMC standards.

With the AU-PD60 Plug in transformer there is no requirement for a junction box. Testing and commissioning time can be reduced by as much as 40% by simply disconnecting the transformer. The transformer is pre-wired with 30cm LV cable and an MR16 lampholder & clip.

- Primary disconnection 'Plug-In' section
- Fully dimmable with resistive and inductive dimmers
- Auto-reset thermal protection
- 1.0kV surge protection
- Loop-in, Loop-out primary wiring terminals
- Pre-wired with 30cm LV cable and MR16 lampholder


Installation Procedure for Plug-In Transformer

1: Connect the loop-in, loop-out live and neutral mains cables to the transformer primary section
2: Carry out the insulation resistance test
3: Connect the low voltage luminaire to the secondary side of the transformer
4: Plug the electronic section into the primary section and install the transformer and luminaire into the ceiling.

If you can't find what you're looking for, please don't hesitate to contact us!

Search Criteria:
Category: Outdoor Lighting / Lighting Controllers
Group: Low Voltage Transformers / Low Voltage Driver
Sub Group: Electronic Transformers
Description: Low voltage transformer / Low voltage plug-in transformer / Low voltage plug in transformer / Aurora Pre-wired transformer
Code: Aurora AU-PD60