AKW iSure 9.5kW Non Thermostatic Electric Shower

Gloss White iSure 9.5kW Electric Shower

AKW 29022

£94.25 ex. vat £113.10 inc. vat

In Stock

Order by 4pm for Next Day Delivery

AKW 29022 Gloss White iSure 9.5kW Electric Shower


AKW 29022
iSure Non Thermostatic 9.5kW Electric Shower

The perfect solution for replacement installations and when simple is simply the best. White dials set into a deep gloss surround provide a minimalist look suited to all showering areas. Advanced fitting innovations and a handy fitting template mean it’s quick and easy to install over most manufacturers’ footprints, which means less re-tiling, cabling and pipework. 

Technical Specification

Plumbing Supply:

Supply Source : Mains pressure cold water only
Minimum Dynamic Pressure : 50kPa (0.5 Bar)
Maximum Static Pressure : 1000 kPa (10 Bar)
Optimal Minimum Dynamic Pressure : 100 kPa (1 Bar) (Recommended to ensure high performance)
Maximum Inlet Temperature : 28°C
Minimum Inlet Temperature : 2°C
Inlet Connection : 15 mm pipe
Outlet Connection : 1/2” BSP Male thread Fitting

Electricity Supply:

Nominal Rating at 240 V 9.5kW & 8.5kW
Supply Fuse / Circuit Breaker (9.5kW 40/45A) & (8.5kW 35/40A)
Residual Current Device (RCD) 30 mA (must be fitted)
Supply Cable Refer to current wiring regulations and BS 7671 to determine minimum
cable size. No larger than 10 mm2
Isolation Switch (e.g. Pull Cord) 45 Amp Double pole 


Height (H) 380 mm
Width (W) 230 mm
Depth (D) 85 mm
Footprint Height (H2) 345 mm
Footprint Width (W2) 210 mm
Water Ingress Rating IPX4
Water and Cable Entry Points Top, bottom or back

Hamilton Convex HLMCU12DRCDP12

Fully Loaded Amendment 3 Dual RCD 12 Way Consumer Unit

£78.33 ex. vat £94.00 inc. vat

Hamilton HLRCBO4030B

Hamilton 40amp RCBO B Type to suit the Convex and Contour Amendment 3 Consumer Units

£15.90 ex. vat £19.08 inc. vat